| John Deere 6410 Specs | |
|---|---|
| Model Year | 1999 – 2002 |
| Series | 6000 TEN Series |
| Type | Utility tractor |
| Manufacturer | John Deere |
| Factory | Mannheim, Baden-Württemberg, Germany |
| Power | |
|---|---|
| Engine (gross) | 104 hp (77.6 kW) |
| PTO (claimed) | 90 hp (67.1 kW) |
| Drawbar (tested) | 74.8 hp (55.8 kW) |
| PTO (tested) | 98.0 hp (73.1 kW) |
| Engine Specifications | |
|---|---|
| Engine Model | 4045TL053 / 4045TLA51 |
| Power at rated speed | 76 kW (103 hp) / 77 kW (105 hp) |
| Max. torque at 1500 rpm | 432 Nm (318 lb-ft) |
| Max. PTO power at rated PTO speed | 69 kW (94 hp) |
| Number of cylinders | 4 |
| Bore | 106.5 mm (4.19 in.) |
| Stroke | 127.0 mm (5.00 in.) |
| Displacement | 4530 cm³ (276 in³) |
| Firing order | 1-3-4-2 |
| Intake valve clearance | 0.35 mm (0.014 in.) |
| Exhaust valve clearance | 0.45 mm (0.018 in.) |
| Transmission | |
|---|---|
| Type 1 | SyncroPlus transmission |
| Gear selections | 12 forward gears, 4 reverse gears |
| Power Reverser | synchronized gears, mechanically actuated |
| Type 2 | PowrQuad transmission (planetary gears, hydraulically actuated) |
| Gear selections | 16, 20, or 24 forward gears, 12, 16, 20, or 24 reverse gears |
| Actuation of reverse drive lever | electrical/hydraulic, under load, without operating the clutch |
| Clutch | electric/hydraulic |
| Type 3 | AutoPowr transmission (infinitely variable mechanical/hydraulic transmission) |
| Speed ranges | 0.05 – 40 km/h (0.03 – 25 mph) or 0.05 – 50 km/h (0.03 – 31 mph) |
| Note | Change of direction of travel |
| Hydraulic System | |
|---|---|
| Type | Closed-center system with Load-Sensing control |
| Pump type | Axial piston pump |
| System pressure minimal (stand-by) | 3000 kPa (30 bar; 435 psi) |
| System pressure maximal | 20000 kPa (200 bar; 2900 psi) |
| Capacities | |
|---|---|
| Fuel tank | 165 l (43.6 U.S. gal.) |
| Cooling system (tractors without cab/with cab) | 11.0 l (2.9 U.S. gal.)/13.5 l (3.6 U.S. gal.) |
| Crankcase with filter | 12 l (3.2 U.S. gal.) |
| AutoQuad II transmission with 20/20 or 24/24 gears | 50 l (13.2 U.S. gal.) |
| AutoPowr extra with creeper transmission | 1 l (0.3 U.S. gal.) |
| AutoPowr extra with front-wheel drive | 3 l (0.8 U.S. gal.) |
| AutoPowr extra with TLS axle | 3 l (0.8 U.S. gal.) |
| Axle housing (AS 2035 front-wheel drive axle narrow track) | 3.6 l (1.0 U.S. gal.) |
| Note | Final drive housing (AS 2035 front-wheel drive axle narrow track) |
| Loads and Weights | |
|---|---|
| Maximum permissible static vertical load) on swinging drawbar (transport, 250 mm; 9.8 in.) | – |
| Tractors without front-wheel drive | 1400 kg (3085 lb) |
| Tractors with front-wheel drive | 1600 kg (3525 lb) |
| Extended 250 mm (9.8 in.) | 2250 kg (4960 lb) |
| Extended 350 mm (13.8 in.) | 1400 kg (3085 lb) |
| Extended 400 mm (15.7 in.) | 1200 kg (2645 lb) |
| Extended 550 mm (21.7 in.) | 800 kg (1765 lb) |
| Pin diameter 30 mm (1.2 in.) | 1600 kg (3525 lb) |
| Pin diameter 38 mm (1.5 in) | 1000 kg (2205 lb) |
| Maximum permissible static vertical load on the hook of the pick-up hitch | 3000 kg (6615 lb) |
| Normal operation | 2050 kg (4520 lb) |
| With front loader (no weight at 3-point hitch) | 5000 kg (11025 lb) |
| With front loader (600 kg; 1322 lb at 3-point hitch) | 5300 kg (11685 lb) |
| With front-end attachments | 3200 kg (7055 lb) |
| Axle without brake | 3500 kg (7715 lb) |
| Axle with brake | 3800 kg (8375 lb) |
| With front loader (no weight at 3-point hitch) | 5200 kg (11465 lb) |
| With front-end attachments | 3600 kg (7935 lb) |
| With front loader (600 kg; 1322 lb at 3-point hitch) | 5500 kg (12125 lb) |
| Maximum permissible rear axle load | 6500 kg (14325 lb) |
| Maximum permissible total weight | 8000 kg (17635 lb) |
John Deere 6410 overview
The John Deere 6410 is a highly regarded utility tractor that falls under the 6000 TEN Series, known for its reliability and versatility in agricultural operations. Manufactured by John Deere in Mannheim, Germany, this tractor model comes in several variants to cater to various farming needs, including the standard 6410, the low-profile 6410L, and the 6410S with a low-profile cab.
One of the standout features of the John Deere 6410 is its robust powerplant, boasting an engine that delivers 104 horsepower (77.6 kW) at its gross rating. This engine provides ample power for a wide range of tasks, from plowing fields to operating attachments. With a Power Take-Off (PTO) rating of 90 horsepower (67.1 kW), it ensures efficient power transfer to implements.
The tractor’s transmission options offer flexibility and efficiency. You can choose between SyncroPlus, PowrQuad, and AutoPowr transmissions, each tailored to specific requirements. Whether you need a synchronized gear transmission or an infinitely variable mechanical/hydraulic transmission, the John Deere 6410 has you covered.
In terms of hydraulic performance, this tractor boasts a closed-center hydraulic system with Load-Sensing control, ensuring precise and efficient hydraulic operations. The hydraulic system is powered by an axial piston pump and operates within a pressure range of 3000 to 20000 kPa.
The John Deere 6410 also offers generous fuel and fluid capacities, making it suitable for extended work periods without frequent refueling or maintenance. Its comfortable and functional design, including options for a low-profile cab, ensures that operators can work efficiently and comfortably during long hours in the field.
With various load and weight specifications, this tractor can handle a wide range of implements and attachments, making it a versatile workhorse on the farm. Its maximum permissible total weight of 8000 kg (17635 lb) ensures that it can handle substantial loads.
Overall, the John Deere 6410 is a reliable and powerful utility tractor that combines performance, versatility, and operator comfort to meet the demands of modern agriculture. Whether you’re plowing, planting, or performing other farm tasks, the 6410 is a dependable companion for getting the job done efficiently.