The John Deere 5075E, part of the 5E Series, is a versatile utility tractor designed for a wide range of agricultural and industrial tasks. Manufactured by John Deere, a renowned name in the industry, this compact tractor offers a balanced blend of power and efficiency. With a reliable diesel engine and multiple transmission options, it’s suitable for various applications, from plowing and cultivating to material handling. Its open-center hydraulic system ensures smooth operation of attachments, and the tractor is available in both two-wheel and four-wheel drive configurations. Whether on the farm or at the worksite, the 5075E is a dependable workhorse.
| John Deere 5075E Specs |
|---|
| Model Year | 2008-2012 |
| Series | 5E Series |
| Type | Utility tractor |
| Manufacturer | John Deere |
| Factory | Pune, Maharashtra, India |
| John Deere 5075E Power |
|---|
| Engine (Gross) | 75 hp (55.9 kW) |
| PTO (Claimed) | 61 hp (45.5 kW) |
| PTO (Tested) | 64.42 hp (48.0 kW) |
| Engine Detail |
|---|
| Engine Manufacturer | John Deere |
| Engine Model | PowerTech 3029H |
| Fuel Type | Turbocharged Diesel |
| Engine Type | 3-cylinder, Liquid-cooled |
| Displacement | 179 cubic inches (2.9 liters) |
| Bore/Stroke | 4.19 x 4.33 inches (106 x 110 mm) |
| Rated Power (EC 97/98) | 75 hp (55.9 kW) |
| Air Cleaner | Two paper elements |
| Pre-heating | Coolant heater (optional), Heavy-duty air pre-heater (optional) |
| Compression | 17.8:1 |
| Rated RPM | 2400 |
| Idle RPM | 800-2600 |
| Operating RPM | 1800-2400 |
| Torque | 195.5 lb-ft (265.1 Nm) |
| Torque RPM | 1700 |
| Firing Order | 1-2-3 |
| Starter Volts | 12 |
| Coolant Capacity | 10 quarts (9.5 liters) |
| Intake Valve Clearance | 0.014 inches (0.356 mm) |
| Exhaust Valve Clearance | 0.018 inches (0.457 mm) |
| Transmissions Overview |
|---|
| Var | 9-speed |
| Var | 9-speed partially synchronized |
| Transmission (SyncReverser) |
|---|
| Type | SyncReverser |
| Gears | 9 forward and 3 reverse |
| Clutch | Dry disc |
| Oil Capacity | 40.15 quarts (38.0 liters) |
| Oil Type | JD Hy-Gard |
| Note | Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shuttle shift between 2 and R in all ranges.mOther shifts are not synchronized. The SyncReverser is standard equipment on two-wheel drive models. |
| Transmission (SyncShuttle) |
|---|
| Type | Partially synchronized |
| Gears | 9 forward and 3 reverse |
| Clutch | Dry disc |
| Oil Capacity | 41.2 quarts (39.0 liters) |
| Oil Type | JD Hy-Gard |
| Note | Three gears (1-3) plus reverse (R) in each of three ranges (A-C). Shuttle shift between 2 and R in all ranges. Forward gear shifts in-range are synchronized. Shifts between ranges are not synchronized. The SyncShuttle is standard equipment on four-wheel drive models. |
| Mechanical |
|---|
| Chassis | 4×2 2WD, 4×4 MFWD 4WD |
| Final Drives | Planetary |
| Differential Lock | Rear diff lock standard |
| Steering | Hydrostatic power |
| Brakes | Hydraulic wet disc |
| Cab | Folding 2-post ROPS, Optional canopy, Optional deluxe canopy with lights and insulation |
| Capacity |
|---|
| Fuel | 18 gallons (68.1 liters) |
| 2WD Hydraulic System | 10 gallons (37.9 liters) |
| 4WD Hydraulic System | 10.3 gallons (39.0 liters) |
| Front Axle | 4.8 quarts (4.5 liters) |
| Front Hubs | 0.85 quarts (0.8 liters *) |
| Hydraulics |
|---|
| Type | Open center |
| 2WD Capacity | 10 gallons (37.9 liters) |
| 4WD Capacity | 10.3 gallons (39.0 liters) |
| Pressure | 2828 psi (195.0 bar) |
| Rear Valves | 1 or 2 |
| Mid Valves | 2 (optional) |
| Pump Flow | 11.4 gpm (43.1 lpm) |
| Total Flow | 18.2 gpm (68.9 lpm) |
| Steering Flow | 6.8 gpm (25.7 lpm) |
| Steering Pressure | 1958 psi (135.0 bar) |
| Tractor Hitch |
|---|
| Rear Type | 2 |
| Control | Position and top-link draft control |
| Rear Lift (at 24″/610mm) | 3,192 lbs (1447 kg) |
| Drawbar | Adjustable drawbar |
| Power Take-off (PTO) |
|---|
| Rear PTO | Independent |
| Clutch | Mechanical |
| Rear RPM | 540 |
| Engine RPM | 540@2400 |
| Electrical |
|---|
| Ground | Negative |
| Charging System | Alternator |
| Charging Amps | 40 |
| Battery CCA | 623 |
| Battery Volts | 12 |
| John Deere 5075E Tires |
|---|
| Standard Tires | (Ag) |
| Front (2WD) | 7.50-16 |
| Rear (2WD) | 16.9-28 |
| Front (4WD) | 9.5-24 |
| Rear (4WD) | 16.9-28 |
| Lawn/Turf Front (2WD) | 27/12LL-15 |
| Lawn/Turf Front (4WD) | 9.5-16 |
| Lawn/Turf Rear | 21 |
| John Deere 512 Loader |
|---|
| Height (to pin) | 114 inches (289 cm) |
| Clearance, dumped bucket | 85 inches (215 cm) |
| Dump reach | 26 inches (66 cm) |
| Dump angle | 57° |
| Reach at ground | 68 inches (172 cm) |
| Rollback at ground | 23° |
| Breakout force (at pin) | 4,775 lbs (2165 kg) |
| Breakout force (at 800mm) | 3,250 lbs (1474 kg) |
| Lift to full height (at pin) | 2,453 lbs (1112 kg) |
| Lift to full height (at 800mm) | 1,580 lbs (716 kg) |
| Lift to 1.5m (at pin) | 3,236 lbs (1467 kg) |
| Lift to 1.5m (at 800mm) | 2,343 lbs (1062 kg) |
| Bucket width | 73 inches (185 cm) |
| John Deere 553 Loader |
|---|
| Height (to pin) | 122 inches (309 cm) |
| Clearance, dumped bucket | 94 inches (238 cm) |
| Dump reach | 35 inches (88 cm) |
| Dump angle | 41° |
| Reach at ground | 74 inches (187 cm) |
| Rollback at ground | 33° |
| Breakout force (at pin) | 5,378 lbs (2439 kg) |
| Breakout force (at 800mm) | 3,604 lbs (1634 kg) |
| Lift to full height (at pin) | 3,133 lbs (1421 kg) |
| Lift to full height (at 800mm) | 1,956 lbs (887 kg) |
| Lift to 1.5m (at pin) | 4,008 lbs (1818 kg) |
| Lift to 1.5m (at 800mm) | 2,891 lbs (1311 kg) |
| Bucket width | 72 inches (182 cm) |
John Deere 5075E overview
The John Deere 5075E, a member of the 5E Series, is a versatile utility tractor designed to handle a wide range of tasks on the farm or worksite. Produced by the renowned manufacturer John Deere, this compact utility tractor was manufactured in Pune, Maharashtra, India. It falls within the 75-horsepower category, making it suitable for various agricultural and industrial applications.
Under the hood, the 5075E is powered by a turbocharged diesel engine, the John Deere PowerTech 3029H. This 3-cylinder liquid-cooled engine has a displacement of 2.9 liters and generates 75 horsepower, ensuring ample power for demanding tasks. With a high torque rating and efficient design, it’s capable of handling heavy loads and maintaining consistent performance.
The transmission options for the 5075E include the SyncReverser for two-wheel drive models and the SyncShuttle for four-wheel drive models. These transmissions offer nine forward and three reverse gears, providing flexibility for various operations. Additionally, the tractor features a rear differential lock, enhancing traction in challenging conditions.
The hydraulic system is open-center and offers a flow rate of 18.2 gallons per minute, ensuring smooth and responsive operation of hydraulic attachments. The tractor’s rear hitch can lift up to 3,192 pounds at the 24-inch mark, making it compatible with a wide range of implements and equipment.
The John Deere 5075E is equipped with either two-wheel drive or four-wheel drive, with the latter offering enhanced traction and stability. It features a folding two-post ROPS (Roll-Over Protective Structure) for operator safety, and there are options for canopies and deluxe canopies with lights and insulation for added comfort and protection.
Overall, the John Deere 5075E is a reliable and robust utility tractor designed to handle a variety of tasks, from plowing and mowing to material handling and loader work. Its combination of power, versatility, and John Deere’s reputation for quality make it a popular choice for those seeking a capable and efficient tractor for their needs.
