John Deere 2750

The John Deere 2750 is a versatile utility tractor that was manufactured from 1983 to 1986. It comes in both 2WD and 4WD configurations and belongs to the 2050 series. This tractor is equipped with a powerful four-cylinder turbocharged diesel engine, providing 75 horsepower (76 PS) at 2,500 rpm of PTO output power.

The transmission options include a partially synchronized transmission with 8 forward and 4 reverse gears, a partial powershift transmission with 16 forward and 8 reverse gears, or a partially synchronized transmission with 12 forward and 8 reverse gears, offering flexibility in handling various tasks.

The John Deere 2750 features hydrostatic power steering, differential hydraulic wet disc brakes, and is available with either a two-post ROPS (Roll-Over Protective Structure) or a Sound-Gard cab with heating and air-conditioning options for operator comfort. It also includes a substantial 98.5-liter (26 US gallons) fuel tank to support long hours of operation.

Dimentions
Length 2WD3,520 mm (138.6 in)
Length 4WD3,470 mm (136.9 in)
Height (Cab)2,590 mm (102 in)
Wheelbase
2WD2,260 mm (89.2 in)
4WD2,280 mm (90.0 in)
2WD620 mm (24.4 in)
4WD480 mm (18.9 in)
Weight
2WD with Cab3,725 kg (8,210 lbs)
4WD with Cab4,040 kg (8,910 lbs)
Fuel Tank
Capacity98.5 liters (26 US gal.; 21.7 Imp. gal)
Other feartures
Battery12V
Cabin TypeTwo-post ROPS or Sound-Gard cab with available heat and air-conditioning.
Engine
Engine ModelJohn Deere
Engine TypeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel TypeDiesel
Displacement3.9 L, 3,916 cm², (239.0 cu·in)
Bore and Stroke106.0 mm X 110.0 mm (4.17 in X 4.33 in)
Compression Ratio16.8:1
Horsepower76 PS (55.9 kW; 75.0 HP) at 2,500 rpm
StarterElectric
Coolant Capacity3.2 L (3.4 US. qt, 2.8 Imp. qt.)
Transmission and Chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering TypeHydrostatic power
BrakesDifferential hydraulic wet disc
Differential LockRear standard
Transmission Models
TypeJohn Deere Top-Shaft Synchronized (8 forward and 4 reverse gears)
TypeJohn Deere Hi-Lo Top-Shaft Synchronized (16 forward and 8 reverse gears)
TypeJohn Deere TSS Creeper (12 forward and 8 reverse gears)
Speed
ForwardUp to 28.3 km/h (17.6 mph)
ReverseUp to 12.7 km/h (7.9 mph)
Tires
Front TiresAg 7.50-16 (2WD), 13.6-24 (4WD)
Rear TiresAg 18.4-30 (2WD), 15.5-38 (4WD)
Three-Point Hitch
CategoryII/I
Control TypeLoad and depth control
Lift Capacity (at ends)1,495 kg (3,295 lbs)
Power Take-Off (PTO)
Rear PTO TypeIndependent
Rear PTO Speed540, 540/1,000 rpm
Hydraulic System
Hydraulic TypeClosed center
Pressure50.0 psi (3.4 bar)
Valves1 or 2
Pump Flow23.0 gpm (87.1 lpm)
Key features of the John Deere 2750:

Engine: Four-cylinder turbocharged diesel engine with 75 horsepower (76 PS)
Transmission options: Partially synchronized transmission (8F/4R), partial powershift transmission (16F/8R), and partially synchronized transmission with creeper gears (12F/8R)
Tires: Front and rear tire options available for both 2WD and 4WD configurations
Three-Point Hitch: Category II/I hitch with load and depth control and a lift capacity of 1,495 kg (3,295 lbs)
PTO: Independent rear PTO with speeds of 540 and 540/1,000 rpm
Hydraulic system: Closed-center hydraulic system with one or two valves and a pump flow of 23.0 gpm (87.1 lpm)

Leave a Reply

Your email address will not be published. Required fields are marked *