The John Deere 2210 embodies compact versatility, offering robust performance in a small package. Engineered for efficiency and durability, this sub-compact utility tractor seamlessly balances power and maneuverability. Its reliable drivetrain, featuring a two-range hydrostatic transmission and mechanical front-wheel drive, ensures smooth operation and excellent traction in any terrain. With a focus on ease of use and versatility, the 2210 is equipped to handle a variety of tasks with precision and reliability, making it an ideal choice for homeowners, landscapers, and small-scale agricultural operations seeking dependable performance in a compact tractor.
General Information |
---|
Manufacturer | John Deere |
Production Years | 2003 – 2006 |
Type | Sub-Compact Utility Tractor |
Production Location | Augusta, Georgia, USA |
Engine Specifications |
---|
Manufacturer | Yanmar |
Model Number | 3TNE74 |
Type | Diesel |
Gross Horsepower | 17.1 kW (23.0 hp) |
PTO Horsepower | 13.2 kW (17.7 hp) |
Cylinders | Three |
Bore/Stroke | 2.91×3.07 inches (74 x 78 mm) |
Rated Engine Speed | 3000 rpm |
Speed, Fast Idle | 3250 rpm |
Speed, Slow Idle | 1400 rpm |
Operating Range | 1400 – 3250 rpm |
Cooling Type | Liquid |
Oil Filter | Standard Single Element |
Air Cleaner | Dry Type w/ Safety Element |
Fuel System Type | Indirect Fuel Injection |
Fuel | Diesel |
Fuel Filter | Replaceable Element |
Fuel Pump | In-line with Solenoid Shutoff |
Electrical System Type | 12 Volt |
Battery Size | 435 Cold Cranking Amps -18°C (0°F) |
Alternator | 20 amp |
Drivetrain |
---|
Transmission Type | 2 Range Hydrostatic |
Number of Speeds | Infinite |
Mechanical Front Wheel Drive (MFWD) | Standard |
MFWD Capability | All Ranges |
MFWD Engagement | On The Go |
Final Drive | Spur Gear |
Rear Axle Maximum Load | 1415 kg (3120 lb) |
Front Axle Maximum Load | 1415 kg (3120 lb) |
Forward Speed-Range High | 0-13.3 km/h (0-8.4 mph) |
Forward Speed-Range Low | 0-6.6 km/h (0-4.3 mph) |
Reverse Speed-Range High | 0-10.6 km/h (0-6.3 mph) |
Reverse Speed-Range Low | 0-5.3 km/h (0-3.2 mph) |
Power Take-Off (PTO) |
---|
Type | Independent |
Clutch Type | Wet Disk |
Mid PTO Brake | Shoe Type |
Speed-Mid PTO rpm / 2900 engine RPM | 2100 rpm |
Speed-Rear PTO rpm / 2900 engine RPM | 540 rpm |
Mechanical |
---|
Chassis | 4×4 MFWD 4WD |
Final drives | Spur gear |
Differential lock | Mechanical rear |
Steering | Power |
Brakes | Wet Disk |
Cab | Two-post fixed ROPS (Roll Over Protective Structure) |
Hydraulic System |
---|
Type | Open center |
Capacity | 3.4 gal (12.9 L) |
Pressure | 1987 psi (137.0 bar) |
Mid valves | 2 |
Pump flow | 3 gpm (11.4 lpm) |
Total flow | 5.5 gpm (20.8 lpm) |
Steering flow | 2.5 gpm (9.5 lpm) |
3-Point Hitch |
---|
Type | Category 1 |
Hitch Plate Maximum Vertical Load | 255 kg (562 lb) |
Lift Capacity-61 cm (24 in.) behind link arms | 318 kg (701 lb) |
Total Lift Height | 248 mm (9.76 in.) |
Wheels and Tires |
---|
Front Standard | 18×8.5-10 R1 |
Front Optional | 18×8.5-10 R3 |
Rear Standard | 26×12.00-12 R1 |
Rear Optional | 26×12.00-12 R3 |
Front Tire Inflation Pressures (Maximum) | 18×8.5-10 R1 – 152 kPa (22 psi) / 18×8.5-10 R3 – 152 kPa (22 psi) |
Rear Tire Inflation Pressures (Maximum) | 26×12.00-12 R1 – 83 kPa (12 psi) / 26×12.00-12 R3 – 83 kPa (12 psi) |
Capacities |
---|
Fuel Tank | 19 L (5.0 gal) |
Cooling System | 3.0 L (3.2 qt) |
Crankcase with Filter | 2.1 L (2.2 qt) |
Transmission and Hydraulic System | 13.0 L (3.4 gal) |
Front Axle | 2.5 L (2.6 qt) |
Wheelbase | 1450 mm (57.1 in.) |
Overall Length with 3-point Hitch | 2650 mm (104.3 in.) |
Overall Width | 1200 mm (47.2 in.) |
Tread Width Centerline (Minimum) | Front 905 mm (35.6 in.) / Rear 896 mm (35.3 in.) |
Height From Ground To Top of Hood (R1 Tires) | 1061 mm (41.8 in.) |
Height From Ground To Top of Hood (R3 Tires) | 1054 mm (41.5 in.) |
Height From Ground To Top of ROPS | 1970 mm (77.6 in.) |
Ground Clearance Front Axle | 195 mm (7.7 in.) |
Turning Radius MFWD Off | 2300 mm (88.6 in.) |
Weight Machine equipped with a ROPS, 3-point hitch, standard R1 tires and all fluids | 635 kg (1400 lb) |
62-inch Mower deck |
---|
Type | Mid-mount 3-blade |
Cutting width | 62 inches (157 cm) |
Belt | Shaft-driven |
Blade |
---|
Type | Front-mount John Deere |
Width | 54 inches (137 cm) |
Lift height | 11 inches (27 cm) |
Cut depth | 3.5 inches (8 cm) |
Weight | 50 lbs (22 kg) |
46-inch Snow blower |
---|
Type | Front-mount single-stage |
Clearing width | 46 inches (116 cm) |
Clearing height | 12 inches (30 cm) |
Weight | 250 lbs (113 kg) |
Overall width | 47.5 inches (120 cm) |
John Deere 210 Loader |
---|
Height (to pin) | 68.5 inches (173 cm) |
Clearance, dumped bucket | 50 inches (127 cm) |
Dump reach | 242 inches (614 cm) |
Dump angle | 47.2 degrees |
Reach at ground | 50.2 inches (127 cm) |
Rollback at ground | 26.5 degrees |
Rollback, raised | 98.2 degrees |
Breakout force (at pin) | 1577 lbs (715 kg) |
Breakout force (at 500mm) | 1072 lbs (486 kg) |
John Deere 2210 Overview
The John Deere 2210 is a robust and versatile sub-compact utility tractor designed to tackle a wide range of tasks with ease. Manufactured by John Deere, a trusted name in agricultural equipment, the 2210 was produced between 2003 and 2006 in Augusta, Georgia, USA. This tractor packs a punch with its reliable Yanmar diesel engine, model number 3TNE74, boasting a gross horsepower of 17.1 kW (23.0 hp) and a PTO horsepower of 13.2 kW (17.7 hp). Featuring a three-cylinder design with a bore/stroke ratio of 2.91×3.07 inches (74 x 78 mm), this engine is engineered for efficiency and durability.
One of the standout features of the John Deere 2210 is its drivetrain, which includes a two-range hydrostatic transmission providing infinite speeds for smooth and precise control. The standard mechanical front-wheel drive (MFWD) ensures excellent traction in all conditions, with engagement possible on the go for added convenience. The final drive system utilizes robust spur gears, while the rear axle can handle loads of up to 1415 kg (3120 lb), ensuring the tractor’s capability to handle heavy-duty tasks with ease.
In terms of power take-off (PTO) capabilities, the John Deere 2210 comes equipped with an independent PTO system featuring a wet disk clutch type for efficient power transfer. The mid PTO operates at 2100 rpm, while the rear PTO spins at 540 rpm, ensuring compatibility with a wide range of implements and attachments.
Hydraulics play a crucial role in the functionality of the 2210, with an open-center hydraulic system offering a capacity of 3.4 gallons (12.9 liters) and a pressure rating of 1987 psi (137.0 bar). Two mid valves are included for enhanced versatility, while the steering flow of 2.5 gpm (9.5 lpm) ensures responsive handling.
The 3-point hitch system, categorized as Category 1, provides a maximum vertical load of 255 kg (562 lb) and a lift capacity of 318 kg (701 lb) at 61 cm (24 in.) behind the link arms. This allows for easy attachment of various implements, enhancing the tractor’s versatility for different tasks.
The John Deere 2210 rolls on reliable wheels and tires, with options for both front and rear configurations to suit different needs. The front tires measure 18×8.5-10 R1 as standard, while the rear tires are 26×12.00-12 R1. With maximum inflation pressures specified for each tire size, operators can ensure optimal performance and longevity.
In terms of dimensions, the John Deere 2210 strikes a balance between compactness and functionality. With a wheelbase of 1450 mm (57.1 in.) and an overall length of 2650 mm (104.3 in.) with the 3-point hitch, this tractor offers maneuverability without compromising on performance. The two-post fixed ROPS provides essential rollover protection while maintaining a height of 1970 mm (77.6 in.) from the ground to the top of the ROPS.
Attachments further enhance the versatility of the John Deere 2210, with options including a 62-inch mower deck, a 54-inch front-mount blade, a 46-inch front-mount snow blower, and the John Deere 210 Loader. The loader boasts impressive specifications, including a maximum breakout force of 1650 lbs (748 kg) and a lift capacity of 622 lbs (282 kg) at the pin.
Summarizing, the John Deere 2210 is a compact yet powerful tractor that excels in a variety of applications, from mowing and landscaping to snow removal and material handling. With its durable construction, reliable performance, and extensive range of attachments, it’s a trusted workhorse for both residential and commercial users alike.